CSZ Hemotherm 400CE Sub Zero Cooler

CSZ Hemotherm 400CE Features

The CSZ Hemotherm 400CE dual reservoir heater/cooler is used to lower, maintain, or raise the temperature of the water flowing through a blood oxygenator/heat exchanger that is used to cool or warm blood during cardiopulmonary bypass procedures lasting 6 hours or less. This Sub Zero cooler may also be used with a hyper/hypothermia blanket under the patient to provide warming through conductive heat transfer.

• Temperature controlled water in a full range of controllability between 37.4°F and 107.6°F.
• High water flow rates at low pressures.
• Able to maintain normal body temperature particularly during lengthy surgical procedures with a hyper-hypothermia blanket.
• Optional remote control model 414CE.

CSZ Hemotherm 400CE Specifications

Dimensions

• Height: 32” (81 cm)
• Width: 22” (56 cm)
• Depth: 22” (56 cm)
• Weight: 198 lbs ( 89.8 kg)

Reservoir Capacity

• Cool: 8 qts (7.6 liters)
• Heat: 6 qts (5.7 liters)
• Reservoir Fluid: Distilled Water Only
• Reservoir Opening: Easy-to-fill
• Reservoir Construction: Plastic

Flow Rate

• 13 Liters/Minute (3.5 GPM) through self-sealing quick connect fittings
• 15 Liters/Minute (4 GPM) with flow through quick connect fittings

Maximum Pressure

• 12.5 PSI - Heat Exchanger and Blanket

Connections

• 1 Set 1/2” quick connect fittings for Heat Exchanger
• 1 Set 1/8” quick connect fittings for Blanket
• 1 Set 1/4” quick connect fittings for draining (on unit)
• 1 Additional set 1/2” quick connect fittings included for tubing

Safety

• Secondary Hi Limit Thermostat: 114.8°F ± 32.9°F (46°C ± 0.5°C)
• Primary Hi Limit Thermostat: 111.2°F ± 32.9°F (44°C ± 0.5°C)
• Low Limit Thermostats: 35.6°F ± 32.9°F (2°C ± 0.5°C)

Electrical Characteristics

• 115VAC, 50/60HZ, 16 Amps
• 230VAC, 50/60HZ, 9 Amps

Outlets Required

• 115VAC - 20 Amps, AC grounded hospital grade plug
• 230VAC - 15 Amps, AC grounded with European plug

Circuit Breaker Rating

• In power switch
• 115VAC, 20 Amps
• 230VAC, 15 Amps
• Mains Supply Isolation
• Two-Pole Mains Power Switch